2022 TOPIX Land
Rover based System Pathfinder SDD System Installed on
n
Panasonic FG-G1 i5 6300 with JLR DOIP VCI WF Bosch
Original.
nThe new JLR approved Diagnostics over Internet Protocol (DoIP) Vehicle
Communication Interface (VCI) unit is the only unit that will be
compatible with Pathfinder and all JLR vehicles with the new vehicle
architectures (from the Range Rover/Range Rover Sport (L405/L494) 17MY
onwards) or allow the enhanced diagnostics that Pathfinder
will offer the retailer. The DOIP interface and Pathfinder
software will allow you to activate Jaguar
and Land Rover Apple CarPlay if your car firmware
and hardware are supported. JLR VCI Product
Overview
n
-
n
- Jaguar Land Rover Approved device
- Replacement for JLR
SDD VCI’s - Covers CAN, MultiCAN, ISO9141, and SCP Vehicle
Networks - Suitable for Legacy, Current, and Future
Vehicles - 2m USB Cable as standard included
- Easy to update for J2534 new functionality updates the JLR
VCI connects directly to the vehicle OBDII (Diagnostic) connector, it then
connects to the laptop via a USB cable for use with SDD. Once the J2534 DLL
files are loaded, this product will allow normal operation with JLR SDD
Diagnostic Tool. All communication is possible with this
device.
n
n
n
n
n
n
nPackage Includes
n
-
n
- JLR
DoIP VCI P/N: 1699200366879 - USB Cable (F-00K-108-653)
- Diagnostic Connector Cable (1-699-200-366)
- Ethernet Cable (1-684-465-811)
optional - WLAN USB Stick x 2pcs (1-699-200-155) ( Some of our tools may
be no original package paper box included ) - 2022 Pathfinder System V374
Offline Unlocked and SDD System (no TOPIX Land Rover
required) - CCF
Tools 4.6 official 2015 – 2019 &
CCF
Tools 4.8 2021
– 2022 - Panasonic Touch FZ G1 i5 6300 8G SSD 500Gb
n
n
n
n
n
n
n
n
n
n
With this system package, we will support all customers with
TOPIX
Land Rover Remote Support
nJaguar Land Rover DoIP VCI Supported
Functions:
n
-
n
- Work with the models after 2017, support Pathfinder software
application - Work with the models before 2016, and support SDD
software. - Support all of the SDD’s diagnostic & programming
protocols. - Support all of the Pathfinder’s diagnostic &
programming protocol - Support Pathfinder activation service offline.
- Support WIFI connection
- Support VBF file edit
- Support E-XML file edit
- Support SDD engineering software application
- Support Pathfinder engineering software
application - Support online programming, coding & key
programming - SDD software can update to the newest version with the
assistance of the manufacturers’ engineers, and perform online
programming. - Pathfinder can update to the newest version with the
assistance of the manufacturers’ engineers, and perform online
programming. - Can replace JLR VCI box
- Can replace JLR DoIP VCI box
- The NEW JLR DoIP VCI is the newest interface for Jaguar and
Land Rover vehicles.
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
nThe Pathfinder software It is the only unit
that will be compatible with the Pathfinder Software and all JLR vehicles
with the new vehicle architectures found in 2017 and newer vehicles (from the
Range Rover/Range Rover Sport L405/L494). In addition to the 2017 and newer
vehicles, the DoIP VCI will also be capable of interfacing with 2014 through
2019 Multi-CAN architecture vehicles (see application list below). The
SDD software All 2014-2018 with no DOIP and earlier (2006 to
2014) land rover and Jaguar will still use the SDD JLR software.
14-16MY Vehicles with DOIP VCI support
n
-
n
- XE (X760)
- F-Pace (X761)
- F-Type (X152)
- XF (X260)
- XJ (X351) – 16MY only
- Evoque (L538)
- Discovery Sport (L550)
- Range Rover (L405)
- Range Rover Sport (L494)
n
n
n
n
n
n
n
n
n
nPre-14MY and vehicles not detailed above will continue to use the current
diagnostic system and VCIs. For Land Rovers from 1998-2009, fully compatible
with the T4
Product Platform. The T4 Mobile Plus System software can work
with both Windows XP and Windows
10. Frequently Asked Questions on JLR
DOIP How does the JLR VCI get updated for future
Software Updates? Periodically JLR will release updates to its
products’ drivers and software. These updates are necessary to either release
further device functionality or to resolve field issues. The updating of the
drivers and software is handled by the diagnostic test application which will
install the updates on request. If problems are experienced during device
use, always make sure that the latest device software and drivers have been
installed. How to Install the Diagnostics over Internet
Protocol (DoIP) Vehicle Communication Interface (VCI) unit?
Before Installation:
n
-
n
- PATHFINDER requires a DoIP VCI unit to communicate with the
2017 model year Range Rover L405, Range Rover Sport L494, and New Discovery
L462. - The DoIP VCI must be the only VCI connected to the JLR
Approved Diagnostic Equipment when using PATHFINDER. Future PATHFINDER
communications will appear soon in the ‘Activity Stream’ section on Topix.
Every retailer MUST have the DoIP VCI available in their workshop. The DoIP
VCI is the only JLR approved VCI unit that can communicate with the 2017
model year vehicles identified earlier. - Please be aware that the following instructions are only applicable
for the first use of the VCI. Once the initial installation and settings have
been completed, the DoIP VCI is plug-and-play with the PATHFINDER
software.
n
n
n
n
-
n
- Insert the DoIP VCI USB cable into the DoIP VCI device and
the JLR Approved Diagnostic Equipment. Note: The ‘USB Input Device’ pop-up
will appear, select ‘X’ and close the pop-up. - Select the ‘Windows’ key.
- Select ‘All Programs.
- Select ‘Bosch’.
- Select ‘VCI Software (JLR)’.
- Select ‘VCI Manager (JLR)’.
- Select the VCI icon displayed on the screen.
- Select ‘Connect to VCI’
- Select ‘VCI Update’.
- Select ‘Start Update’.
- The ‘VCI Manager Information’ pop-up will appear, select ‘OK’
to continue. Note: Do not disconnect the DoIP VCI from the JLR Approved
Diagnostic Equipment during the update process. Note: The DoIP VCI update
process will take approximately 12 minutes to complete. - The DoIP VCI will now automatically restart. Wait for the
DoIP VCI to give an audible beep. Select ‘OK’ to continue. - Select ‘X’ and close the ‘VCI Manager’. The DoIP VCI is ready
for use Setting Preferences in PATHFINDER
n
n
n
n
n
n
n
n
n
n
n
n
n
nHow to Set the Preferences in PATHFINDER?
n
-
n
- Select the PATHFINDER icon on the ‘JLR Application
Launcher. - Select ‘Other User’ and enter your ‘User Identification’ and
Password details. - Select ‘Independent Operator’ or ‘Authorised
Repairer’. - Select ‘OK’ and log in.
- Read the content of the ‘Warning’ pop-up and select
‘OK’. - Select the three-bar icon in the top right of the screen.
Select the ‘Settings’ icon. - Select the ‘Communication Interface’ tab. Select
‘D-PDU’. - The ‘Windows Security Alert – Windows Firewall’ pop-up is
displayed. Note: Do not select ‘Cancel’ when the ‘Windows Security Alert’
pop-up is displayed. - In the ‘Windows Security Alert – Windows Firewall’ pop-up,
select the checkboxes for ‘Private Networks’ and ‘Public Networks’, then
select ‘Allow Access‘. - The preferences have now been set in PATHFINDER. Note: Once
the initial installation and settings have been completed, the DoIP VCI is
plug-and-play with the PATHFINDER software.
n
n
n
n
n
n
n
n
n
n
n/*! elementor – v3.6.5 – 27-04-2022 */
n.elementor-heading-title{padding:0;margin:0;line-height:1}.elementor-widget-heading
.elementor-heading-title[class*=elementor-size-]>a{color:inherit;font-size:inherit;line-height:inherit}.elementor-widget-heading
.elementor-heading-title.elementor-size-small{font-size:15px}.elementor-widget-heading
.elementor-heading-title.elementor-size-medium{font-size:19px}.elementor-widget-heading
.elementor-heading-title.elementor-size-large{font-size:29px}.elementor-widget-heading
.elementor-heading-title.elementor-size-xl{font-size:39px}.elementor-widget-heading
.elementor-heading-title.elementor-size-xxl{font-size:59px}
n
JLR TOPIx Remote Support
n[wpforms id=”10013″]
n
n
n
n
Related products
Firmware Upgrade
JLR Scan Tool
Remote Support
